New Original IC LPC2365FBD100,551
ARM7® LPC2300 Microcontroller IC 16/32-Bit 72MHz 256KB (256K x 8) FLASH 100-LQFP (14x14)
- Product Introduction
Product Attributes
|
TYPE |
DESCRIPTION |
|---|---|
|
Category |
Integrated Circuits (ICs) Embedded Microcontrollers |
|
Mfr |
NXP USA Inc. |
|
Series |
LPC2300 |
|
Part Status |
Not For New Designs |
|
Core Processor |
ARM7® |
|
Core Size |
16/32-Bit |
|
Speed |
72MHz |
|
Connectivity |
Ethernet, I2C, Microwire, SPI, SSI, SSP, UART/USART |
|
Peripherals |
Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
|
Number of I/O |
70 |
|
Program Memory Size |
256KB (256K x 8) |
|
Program Memory Type |
FLASH |
|
EEPROM Size |
- |
|
RAM Size |
58K x 8 |
|
Voltage - Supply (Vcc/Vdd) |
3V ~ 3.6V |
|
Data Converters |
A/D 6x10b; D/A 1x10b |
|
Oscillator Type |
Internal |
|
Operating Temperature |
-40°C ~ 85°C (TA) |
|
Mounting Type |
Surface Mount |
|
Supplier Device Package |
100-LQFP (14x14) |
|
Package / Case |
100-LQFP |
|
Base Product Number |
LPC2365 |
General description
The LPC2364/65/66/67/68 microcontrollers are based on a 16-bit/32-bit ARM7TDMI-SCPU with real-time emulation that combines the microcontroller with up to 512 kB ofembedded high-speed flash memory. A 128-bit wide memory interface and a uniqueaccelerator architecture enable 32-bit code execution at the maximum clock rate. Forcritical performance in interrupt service routines and DSP algorithms, this increasesperformance up to 30 % over Thumb mode. For critical code size applications, thealternative 16-bit Thumb mode reduces code by more than 30 % with minimalperformance penalty.The LPC2364/65/66/67/68 are ideal for multi-purpose serial communication applications.They incorporate a 10/100 Ethernet Media Access Controller (MAC), USB full speeddevice with 4 kB of endpoint RAM (LPC2364/66/68 only), four UARTs, two CAN channels(LPC2364/66/68 only), an SPI interface, two Synchronous Serial Ports (SSP), threeI2C-bus interfaces, and an I2S-bus interface. This blend of serial communicationsinterfaces combined with an on-chip 4 MHz internal oscillator, SRAM of up to 32 kB, 16 kBSRAM for Ethernet, 8 kB SRAM for USB and general purpose use, together with 2 kBbattery powered SRAM make these devices very well suited for communication gatewaysand protocol converters. Various 32-bit timers, an improved 10-bit ADC, 10-bit DAC, onePWM unit, a CAN control unit (LPC2364/66/68 only), and up to 70 fast GPIO lines with upto 12 edge or level sensitive external interrupt pins make these microcontrollersparticularly suitable for industrial control and medical systems.
Hot Tags: new original ic lpc2365fbd100,551, China new original ic lpc2365fbd100,551 manufacturers, suppliers, factory, integrated circuit supplier, ic switching, ic compatibility, ic specification, integrated circuit encapsulation, ic die
